This is Version 2 of this module!
The ADDAC501 does random CV generation and outputs it through four independent channels. You can control the desired range of voltages and time frequency at which new values are generated.
It can also be triggered by an external CV source and the output voltages can be either free or quantized (if you prefer to have a standard C Major Pentatonic scale).
Finally you can choose between pure randomness or a brownian distribution, for both the voltage and time intervals.
Maximum and minimum voltage
Maximum and minimum time interval
Three independent outputs
Standard or Brownian distributions
External clock input
. Four variable settings: Voltage Maximum, Voltage Minimum, Frequency Maximum and Frequency Minimum, controlled either manually through the front panel knobs or externally from a CV input.
. Four independent CV outputs.
. Four SPDT switches located at the bottom of the panel.
. Standard / Brownian - selects the type of random algorithm used.
. Quantization On / Off - allows to quantize the zero to five volts range to a Major Pentatonic scale using Moog’s 1v per octave standard.
. External Clock On / Off - allows to sync to an external clock.
. Standard / Brownian Time - selects the type of random algorithm used for the clock timing.
. Format: Eurorack
. Width: 8 HP
. Depth: 5 cm
Control Voltage I/O:
. CV inputs: 0 - 10v
. CV output: 0 - 5v (0 - 10v through jumper)
. Gate in threshold: 2.5v
. Compatible with +-12v and +-15v power supplies
. Max current: 150mA
. Bus Board Cable: 8 × 2 IDC (Doepfer style) connector
ADDAC501 Version 1 videos:
The pdf below features all info regarding upgrading the ADDAC501 Module, including necessary hardware, physical connections and download links.
ADDAC501 Firmware Update Guide:
Version: B_0, February 11th, 2017
1. Normal mode: Random outputs on change
2. New mode: expansion gate outs output a clock signal everytime the correspondant CV output changes.
A_3 features and corrections: